Hotpoint BWM12 - Manual (Page 3)

Electricity Supply ...................................... 2
Recycling & Disposal Information .............. 3
Installation Instructions
............ 3
i. Remove Transit Bolts ....................... 4
ii. Choose a Location... ... 4
iii. Connect to the Water Supply........... 5
iv. Connect to a Drainage System.............. 6
v. Fitting the Door Panels and Plinth........ 7
vi. Fitting your appliance into your kitchen.. 9
vii. Levelling................... 10
The Controls .................................. 11
Getting to know your Appliance:
Washing Machine BWM12............................12
Washer Dryer BWD12.....................................13
Choosing a Programme:
Washing Machine BWM12............................14
Washer Dryer BWD12.....................................15
The Dispenser Drawer ...................... 16
Using your Appliance ...................... 17
Washcare Tips ...................... 19
Cleaning
.......................................... 20
Troubleshooting
General Maintenance
................... 21
After Sales
Service
..................................................... 22
Guarantee
Guarantee Terms & Conditions ............... 23
Key Contacts
................................. Back Page
Retention of this
Instruction Manual
Keep this instruction manual in a
handy place for reference.
It contains important details on
the safe and proper use of your
appliance. If you sell the
appliance, pass it on to someone
else, move house and leave it
behind, make sure that you
provide this manual so that the
new owner can become familiar
with the appliance and safety
warnings.
Contents
3
Follow these 7 steps for a trouble free installation:
i. Remove the Transit Bolts...
ii. Choose a Location...
iii. Connect to the Water Supply...
iv. Connect to a Drainage System...
v. Fitting the door panels and plinth...
vi. Fitting your appliance into your
kitchen...
vii. Levelling...
Installation Instructions
IMPORTANT INFORMATION:
● Do not plug in and switch appliance on at the mains until installation is complete.
● You may be charged for a service call if a problem with your appliance is caused
by incorrect installation or misuse.