HP 2307890A - Manual (Page 22)

16 HP Digital Entertainment Center
Remote Control Operation
Use the remote control to open the Media Center
program; view TV, record TV programs, play previously
recorded TV programs, and play music, movies, or video.
See “Using the Remote Control” in the HP Digital
Entertainment Center Software Guide for detailed
instructions on using the features of the remote control.
To use the remote control, just point it at the HP Digital
Entertainment Center and press a button. Use the remote
control at a maximum distance of 26 feet (8 meters) from
the remote sensor and at a maximum of 45 degrees
(90 degrees total) from the center of the remote sensor.
The remote control will not operate until the HP Digital
Entertainment Center is powered on and fully booted up.
Installing the Remote Control Batteries
1 Slide the battery cover off the back of the remote
control.
2 Insert the two AA alkaline batteries (provided). Make
sure the battery positive and negative ends are
inserted correctly.
3 Replace the battery cover.
4 Test the remote control by pressing any key.
The indicator light should blink.
n
Media Center must be in full-screen mode
(or have focus) for consistent remote control
operation. Performance may vary.
On /Standby
90˚
~26
feet
LED
Indicator
Light
Remote operation
n
Use only alkaline batteries in the remote.
SKIP
FWD
STOP PLAY
MUSIC PICTURESVIDEOS RADIO
TV DVD MENU
PAUSE
REPLAY
REW
RECORD
OK