10 you’re finished! assembly step 6, Assembly step 5 – Horizon Fitness DT680 User Manual
Page 11
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE YOU
BEGIN
TREADMILL OPERA
TION
CONDITIONING GUIDELINES
TROUBLESHOOTING &
MAINTENANCE
LIMITED WARRANTY
10
YOU’RE FINISHED!
ASSEMBLY STEP 6
Connect power plug to the treadmill
and connect the cord to a power
outlet. The on/off switch is located
next to the power cord. Flip this
switch to the ‘on’ position, so that
the switch is lit. You will hear a beep
and the console will light up.
108&348*5$)
$*3$6*5#3&",&3
HARDWARE BAG 5 CONTENTS :
ARC WASHER (K)
Qty. 2
SCREW (J)
Qty. 2
BOLT (H)
Qty. 2
ARC WASHER (I)
Qty. 2
ASSEMBLY STEP 5
ARC WASHER (K)
SCREW (J)
BOLT (H)
ARC WASHER (I)
A Open HARDWARE BAG 5.
B Insert 1 SCREWS (J) and 1 ARC
WASHER (K) into handlebar as
shown to attatch handlebar top
to console.
C Insert BOLT (H) and ARC
WASHER (I) through the back
of the console mast to attatch
the bottom of handlebar to the
console mast.
D Repeat on other side.