HP PhotoSmart 812 - Manual (Page 16)

16 hp photosmart 812 user’s manual
Turning on power
When you press the ON/OFF
button, the lens extends, the Display
turns on briefly, and the Power/
Memory light comes on green.
NOTE If the light comes on red, the
batteries are very low.
Choosing the language
1 Choose your language by scrolling
with the Up/Down arrows on the
Controller .
2 Press OK in the center of the
Controller to select the
highlighted language.
Setting the date and time
1 Adjust the values of the highlighted
selection by using the Up/Down
arrows on the Controller .
2 Press the Left/Right arrows on the
Controller to move to the other
sections and repeat steps one and
two until the correct date and time
are set.
3 Press OK when the proper values are entered.
ON/OFF