Husqvarna 322 L - Manual (Page 22)

22
– English
325C
X-series
1,50/24,5
1,34/34
1,06/27
11 000 - 11 700
2 700
11 700
0,9/ 9 000
Yes
No
Walbro MB 20
Champion RCJ 7Y
0,02/0,5
Zama C1Q
1,06/0,5
9,3/4,2
92/97
2,5/2,1
3,2/2,2
4,4/4,2
6,2/8,4
Technical data
Engine
Displacement, cu. in/cm
3
Cylinder bore, inch/mm
Stroke length, inch/mm
Recommended max. speed, rpm
Idling speed, rpm
Speed of output shaft, rpm
Max. engine output, acc. to ISO 8893
kW/rpm
Catalytic converter muffler
Speed-regulated ignition system
Ignition system
Manufacturer/type of ignition system
Spark plug
Electrode gap, inch/mm
Fuel lubrication system
Manufacturer/type of carburetor
Fuel tank capacity, US pint/litres
Weight
Weight without fuel, cutting tool and
guard, Lbs/kg
Sound levels (se note 1)
Equivalent sound pressure level at the user’s ear,
measured according to ANSI B175.3-1997,
dB(A), min/max:
Vibration levels
Vibration levels on the handles, measured
according to ANSI B175.3-1997, m/s
2
When idling, left/right handles, min:
When idling, left/right handles, max:
At max. speed, left/right handles, min:
At max. speed, left/right handles, max:
TECHNICAL DATA
Note 1: Equivalent sound pressure level is calculated as the time-weighted energy total for sound pressure levels under various
working conditions with the following time distribution: 1/2 idle and 1/2 max. speed.
NOTE! Sound pressure at the user’s ear and vibration on the handles are measured with all the machine’s approved cutting
equipment fitted. The table indicates the highest and lowest values.
325C
1,50/24,5
1,34/34
1,06/27
11 000 - 11 700
2 700
11 700
0,9/ 9 000
No
No
Walbro MB 18
Champion RCJ 7Y
0,02/0,5
Zama C1Q
1,06/0,5
9,3/4,2
91/98
2,7/1,5
3,5/1,7
4,0/3,5
6,0/9,0