Hotpoint WD71 - Manual (Page 10)

Note: We recommend
on completion of your
programme that you
switch off both the
electricity and water
supply to the appliance.
Wash & Auto Dry Programme
10
Sort laundry by label into
groups with the same
wash & dry requirements,
load appliance.
Switch on both the
water & electricity
supply at the mains.
Close door by applying
pressure at the
2 o’clock position.
2 3 1
Add detergent/conditioner
to the dispenser drawer
(pages 17-18).
Refer to detergent
manufacturer’s dosage
instructions.
Switch ‘ON’, a coloured
band indicates selection.
The Infobubble™ will
display ’Select
Programme’
Select optional wash &
dry features (pages 15 -
16), you will hear a beep
and the Infobubble™ will
display the selection.
Select wash programme,
(page 12), you will hear
a beep and the
Infobubble™ will display
the programme
information.
5 4 6
7
Press ‘START’, the door
will lock and the
symbol will appear in the
Infobubble™ throughout
the wash & dry
programme.
1-2 minutes after
completion of the wash
programme the
symbol will disappear
and the door can be
opened. Switch ‘OFF’
after use.
8 9
WARNINGS
● Do not allow children to
play with the appliance
or tamper with the
controls.
● Do not overload
appliance! It may
damage laundry and
reduce the quality of
the wash.
● Do not attempt to open
the door when water is
visible in the drum or if
the symbol is
displayed in the
Infobubble™.
● Do not use a dosing
ball to dispense
detergent when using
a wash and auto dry
programme.