Setting the backlight time 22, Using voice commands 22, Voice dial entry setup 22 – Panasonic EB-GD75 User Manual

Page 31: Setting the backlight time, Using voice commands, Voice dial entry setup

Advertising
background image

The logo is now stored and can be selected as an idle screen option from

the Personalise menu.

Setting the Backlight Time

1

From Idle Z Q, select Personalise > Display Setting >

Backlight Time Z Q

2

Use e to cycle through the times available

3

Z Q to select the desired time

Using Voice Commands

Before any of the phone’s voice activated functions can be used, it is

necessary to configure the phone so that it will recognize a particular voice

and intonation.

Voice Dial Entry Setup

This function allows the user to recall and dial numbers from the

Phonebook using voice commands.

1

From Idle Z Q, select Personalise > Voice Command

> Voice Dial Z Q

2

Z Q to add a new Voice Dial entry to the list

3

Browse through the Phonebook to select an entry which is to be

attributed with a voice command, Z Q twice

Note: Each recording is short in length, so be prepared to speak soon after

initiating the recording.

4

When ready, the user should hold the phone approximately 20cm

from his/her mouth, Z Q and speak clearly into the

microphone to record the name of the selected Phonebook entry

When the recording has stopped, it will be necessary to repeat the name.

5

When prompted, Z Q and repeat the name

When recording is completed for a second time, the display will indicate if

the recording was successful or not. If unsuccessful, repeat from step 4.

22

Personalising Your Phone

Advertising