Symbols on the machine, Symbols in the operator’s manual, Key t o symbols – Husqvarna 1153158-95 User Manual

Page 2: Symbols on the mac hine, Symbols in the operator’ s manual

Advertising
background image

KEY

T

O SYMBOLS

2

English

Symbols on the mac

hine:

W

ARNING! Chain saws can be

dangerous! Careless or improper use can
result in serious or fatal injury to the
operator or others.

Please read the operator’s manual
carefully and make sure you understand
the instructions before using the
machine.

Always wear:

Approved protective helmet

Approved hearing protection

Protective goggles or a visor

Both of the operator

s hands must be used

to operate the chain saw.

Never operate a chain saw holding it with
one hand only.

Never let the guide bar tip come in contact
with any object.

WARNING! Kickback may occur when the
nose or tip of the guide bar touches an
object, and cause a lightning fast reverse
reaction, kicking the guide bar up and
towards the operator. May cause serious
personal injury.

Chain brake, activated (right)
Chain brake, not activated (left)

Other symbols/decals on the mac

hine refer to special

certification requirements for certain markets.

Symbols in the operator’

s

manual:

Switch off the engine b

y moving the

stop switch to the STOP position before
carrying out any checks or
maintenance.

Working position

Choke

Always wear approved protective
gloves.

Regular cleaning is required.

Visual check.

Protective goggles or a visor must be
worn.

Refuelling.

Filling with oil and adjusting oil flow.

The chain brake must be engaged
when the chain saw is started.

WARNING! Kickback may occur when
the nose or tip of the guide bar touches
an object, and cause a lightning fast
reverse reaction, kicking the guide bar
up and towards the operator. May
cause serious personal injury.

The engine exhaust from this product

contains chemical known to the State

of California to cause cancer, birth

defects or other reproductive harm.

Advertising