Hitachi VT-MX411AC - Manual (Page 17)

PREPARATION FOR USE
17
SETTING A VIDEO CHANNEL
If your TV does not have A/V terminals;
When the VCR is in the Playback mode or when the VCR/TV button on the remote control is in
the VCR position, your TV will receive the signals from the VCR on either channel 3 or 4.
To use the VCR with your TV, set the selector switch to CH3 or CH4, whichever is not used or
least used for normal broadcasts in your area. Then set your TV to that same channel.
A/V TERMINALS
If your TV has A/V input jacks, you may connect your VCR's AUDIO/VIDEO OUTPUT jacks
to the audio/video input jacks on the back of your TV.
Direct audio/video connections usually result in a better picture and sound quality for tape
playback. Please see your TV's owner's manual for A/V input connections.