Harbor Freight Tools HFT 10' x 10' Pop Up Canopy 69456 - Manual (Page 3)

Page 3 For technical questions, please call 1-800-444-3353. Item 69456
Setup instructions
Read the entiRe impoRtant SaFety inFoRmation section at the
beginning of this document including all text under subheadings therein
before set up or use of this product.
1. Place the Frame in the center of the
desired location. With two people
standing opposite each other, lift the
Frame and pull it several feet apart.
Caution! Be careful not to pinch fingers or
hands as you pull the Frame into shape.
2. Open the Frame completely and engage
the Slider at each corner by pulling up on
the Slider until it clicks into place.
3. Place the canopy over the Frame and
secure the corners around the top of the
Legs with the hook and loop tape.