HP 6700 User Manual
Page 108
This section contains the following topics:
•
The "Fax Hardware Test" failed
•
The "Fax Connected to Active Telephone Wall Jack" test failed
•
The "Phone Cord Connected to Correct Port on Fax" test failed
•
The "Using Correct Type of Phone Cord with Fax" test failed
•
The "Dial Tone Detection" test failed
•
The "Fax Line Condition" test failed
The "Fax Hardware Test" failed
Solution:
•
Turn the printer off by pressing the (Power) button located on the printer control
panel and then unplug the power cord from the back of the printer. After a few
seconds, plug the power cord in again, and then turn the power on. Run the test
again. If the test fails again, continue reviewing the troubleshooting information
in this section.
•
Try to send or receive a test fax. If you can send or receive a fax successfully,
there might not be a problem.
•
If you are running the test from the Fax Setup Wizard (Windows) or HP Setup
Assistant (Mac OS X), make sure the printer is not busy completing another task,
such as receiving a fax or making a copy. Check the display for a message
indicating that the printer is busy. If it is busy, wait until it is finished and in the idle
state before running the test.
•
Make sure you use the phone cord that came with the printer. If you do not use
the supplied phone cord to connect from the telephone wall jack to the printer,
you might not be able to send or receive faxes. After you plug in the phone cord
that came with the printer, run the fax test again.
•
If you are using a phone splitter, this can cause faxing problems. (A splitter is
a two-cord connector that plugs into a telephone wall jack.) Try removing the
splitter and connecting the printer directly to the telephone wall jack.
After you resolve any problems found, run the fax test again to make sure it passes
and the printer is ready for faxing. If the Fax Hardware Test continues to fail and you
experience problems faxing, contact HP support. Go to his website provides information and utilities that can help you correct
many common printer problems. If prompted, select your country/region, and then
click Contact HP for information on calling for technical support.
Chapter 8
104
Solve a problem