Hitachi 55DMX01W - Manual (Page 11)

11
REAR PANEL JACKS
REAR VIEW
ቢ
SUB WOOFER Output
This jack provides variable audio output to a sub-woofer accessory. With this connection, the audio can be controlled by the
television s main volume. This feature can be turned on and off in the THEATER-SPEAKER SETUP menu.
ባ
AUDIO TO Hi-Fi
These jacks provide variable audio output to a seperate stereo amplifier. With this connection, the audio to the stereo can be
controlled by the television s main volume. Use these jacks for the external audio amplifier.
ቤ
REAR SPEAKER Output Terminals
These terminals are used to connect external speakers, which are used for the surround sound feature. The volume level is
controlled by the television s main volume. These speaker output terminals can be turned on and off in the THEATER-SPEAKER
SETUP menu. Use speakers with 8-Ohm impedance only.
ብ
Coaxial Input
This jack provides high quality audio input from a Dolby Digital DVD player or HDTV Set Top Box. This input can be used for
VIDEO: 1 or VIDEO: 2 audio, as selected in the THEATER-INPUT SOURCE menu. (see page 66)
ቦ
Optical Input
This jack provides high quality audio input from a Dolby Digital DVD player or HDTV Set Top Box. Use a digital optical cable to
connect your TV to a compatible device. This input can be used for VIDEO: 1 or VIDEO: 2 audio, as selected in the THEATER-
INPUT SOURCE menu. (see page 66).
ANT A
TO
CONVERTER
ANT B
1 2 3 4 5
6 7 8 9 10
11 12 13 14 15
ቩ
ቨ
ቪ ቫ
AUDIO
L
R
(MONO)
VIDEO VIDEO
AUDIO
(MONO)
L
R
AUDIO
(MONO)
L
R
VIDEO
S-VIDEO
Y
S-VIDEO
Y
B
R P
P
B
R P
P
S-VIDEO
ቧ
L
R
L
R
SUB
WOOFER
STOP
CONNECT ONLY 8 OHM SPEAKERS
DO NOT SHORT CIRCUIT
THESE TERMINALS
(Such damage is NOT COVERED
by your television warranty)
11 12
REAR SPEAKER 8 Ω ONLY
-
L
+
- +
R
OPTICAL
INPUT
COAXIAL
INPUT
ቢ ቤ ባ ብ ቦ
PC RGB INPUT 1
PC AUDIO
INPUT 1
MONITOR
OUT
INPUT 2 INPUT 1
AUDIO
TO HI-FI
NOTE: This TV s optical digital input jack fully complies with the international standard governing this type of jack (IEC958), and
is designed for connection to a Dolby Digital or PCM from DVD Player or HDTV Set Top Box. Older equipment, some of
which is not fully compliant with IEC958, may not be compatible with the Dolby Digital bit stream. Such a connection
using anything other than Dolby Digital AC-3 or PCM bit stream could create a high noise level, causing damage to your
speakers.