Husqvarna 2354GXLS - Manual (Page 10)

10
OPERATION
KNOW YOUR TRACTOR
READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR
Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and ad just ments.
Save this manual for future reference.
Our tractors conform to the applicable safety standards of the American National Standards Institute.
Fig. 13
(A) ATTACHMENT LIFT SWITCH - Used to raise and lower
the mower deck or other attachments mounted to your trac-
tor. Ignition must be on to operate this switch.
(B) CLUTCH/BRAKE PEDAL – Used for declutching and
brak ing the tractor and starting the engine.
(C) PARKING BRAKE – Locks clutch/brake pedal into the
brake position.
(D)THROTTLE CONTROL – Used to control engine
speed.
(E) ATTACHMENT CLUTCH SWITCH – Used to engage
the mow er blades, or other at tach ments mounted to your
tractor.
(F) IGNITION SWITCH – Used for starting and stopping
the engine.
(G) REVERSE OPERATION SYSTEM (ROS) "ON" PO-
SITION – Allows operation of mower or other powered
attachment while in reverse.
(H) LIGHT SWITCH – Turns the headlights on and off.
(J) CRUISE CONTROL LEVER - Used to set forward
move ment of tractor at desired speed without holding the
forward drive pedal.
(K) FORWARD DRIVE PEDAL
- Used for forward move-
ment of tractor.
(L) REVERSE DRIVE PEDAL- Used for reverse move-
ment of tractor.
(M) FREEWHEEL CONTROL – Disengages transmission
for pushing or slowly tow ing the trac tor with the engine
off.
(N) CHOKE CONTROL – Used when starting a cold
engine.
(P) HOURMETER - Indicates hours of operation.
(Q) 12-VOLT POWER PORT – Used for 12-volt acces-
sories.
(W) AT TACH MENT LIFT INDICATOR
- De ter mines the
cut ting height.
(Z) AMMETER
- Indicates charging (+) or discharging (-)
of battery.
E E
A
W
N N
B B
F F
C C
H
G G
D
M
JJ
K K
L L
Q Q
Z Z P P