HONDA HRR216VXA - Manual (Page 46)

44
SET-UP
ASSEMBLY
Unpack the lawn mower and remove all the cardboard and paper from
around the handlebar.
Handlebar Setup
1. Raise the handlebar into
the mowing position with
the handlebar adjust knobs
in the unlock position.
2. Select the desired
handlebar height by
aligning the adjust knobs
with the handlebar lower
hole or the handlebar
higher hole on the handle
stay.
3. Turn the adjusting knobs
90 degrees into the lock
position and the pins will
spring into the holes and
lock into position.
HANDLEBAR ADJUST KNOB (2)
HANDLEBAR
UNLOCK
LOCK
HANDLEBAR
HIGHER
LOWER