Hunter Fan 41953-01 - Manual (Page 7)

41953-01 02/15/2008

A19
J
A20
Reinstall the motor by inserting the tabs and pushing up into
position. Make sure the wires are not pinched
between the motor and the housing.
Secure the motor by tightening the 2 screws. Turn on the power source.
Connect wiring harness. DO NOT ALLOW THE MOTOR TO
HANG FROM THE WIRING HARNESS.
0000
A17 0000
I
A18
ON
OFF
A21
Test the motor. If the motor does not run,
check the plug connection.
A22
E1
Go to step
on page 17
to attach grille.
023_41953_EngS_2-15-08.indd 7 2/16/08 12:25:32 PM