Removing the access panel – HP DL580 User Manual
Page 23
Operations 23
Removing the access panel
WARNING:
To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION:
Do not operate the server for long periods with the access panel open or removed.
Operating the server in this manner results in improper airflow and improper cooling that can
lead to thermal damage.
1.
Extend the server from the rack, if applicable ("
Extending the server from the rack
).
2.
Unlock the latch using a T-15 Torx screwdriver.
NOTE:
The T-15 Torx screwdriver is shipped with the server and can be located on the rear
3.
Lift up on the hood latch, and remove the access panel.
4.
After installing hardware options, replace the access panel. Be sure that the panel is securely locked
into place before powering up the server.