Electrical connection – Hotpoint MWH211 User Manual

Page 2

Advertising
background image

2

WARNING

- THIS APPLIANCE MUST BE

EARTHED

IMPORTANT

The wires in the mains lead are coloured in
accordance with the following code:

Green and yellow:

Earth

Blue:

Neutral

Brown:

Live

As the colours of the wires in the mains lead
may not correspond with the coloured markings
identifying the terminals in your plug, proceed
as follows:
The green and yellow wire must be connected to
the terminal in the plug marked with the letter E
or the earth symbol

or coloured green or

green and yellow.
The blue wire must be connected to the terminal
marked with the letter N or coloured black.
The brown wire must be connected to the
terminal marked with the letter L or coloured
red.

N

E

L

A) If your appliance comes fitted with a plug, it

will incorporate a 13 Amp fuse. If it does not

fit your socket, the plug should be cut off

from the mains lead, and an appropriate

plug fitted, as below.

WARNING: Very carefully dispose of the cut

off plug after removing the fuse: do not

insert in a 13 Amp socket elsewhere in the

house as this could cause a shock hazard.

With alternative plugs not incorporating a

fuse, the circuit must be protected by a 15

Amp fuse.

If the plug is a moulded-on type, the fuse

cover must be re-fitted when changing the

fuse using a 13 Amp Asta approved fuse to

BS 1362. In the event of losing the fuse

cover, the plug must NOT be used until a

replacement fuse cover can be obtained

from your nearest electrical dealer. The

colour of the correct replacement fuse cover

is that as marked on the base of the plug.

B) If your appliance is not fitted with a plug,

please follow the instructions provided

below:

ELECTRICAL CONNECTION

Data and instruction for Performance Tests according to IEC 60705 and EN 60705 (19999-04)

The International Electrotechnical Commission SC 59H, has developed a Standard for comparative testing of heating performances

of microwave ovens.

We recommend the following for this oven:

Test Nr.

on

standard

Item

Power

level Weight

Standing

time

12.3.1

750 gr

12.3.2

475 gr

12.3.3

900 gr

500 gr

900w

output power

Duration

Function

Note

Egg

custard

14’ - 16’

6’ - 7’

18’ - 20’

6’ - 8’

Sponge

cake

Meat

loaf

Defrosting

minced

meat

only

MW

only

MW

only

MW

5 min.

5 min.

5 min.

15 min.

The upper surface shall be evaluated after the
standing time. The inner custard evaluation shall
be conducted after two hours.

Use the borosilicate glass container stated in the
Standard (max dia. 210 mm) or a Pyrex® glass
container dia. 210 mm, height 50 mm and wall
thick. 6mm.

Cover the container with cling film and pierce the
film. Use the rectangular borosilicate glass container
stated in the Standard or the Arcopal® Cat. nr
Z1/B8 (01)10460-1

Place the frozen load directly on the turnable (D).
Turn upsidedown the load after half of the
defrosting time.

only

MW

700w

output power

Duration

18’ - 20’

8’ - 9’

22’ - 24’

9’ - 11’

13.3

Advertising