HP Monitor LE1901wm User Manual
Page 19
Advertising
![background image](/manuals/90673/19/background.png)
To use the auto-adjustment feature:
1.
Allow the monitor to warm up for 20 minutes before adjusting.
2.
Press the
-/Auto
button on the monitor front panel.
●
You can also press the
Menu
button, then select Image Control from the OSD Main Menu.
Refer to
Adjusting the Monitor Settings on page 15
in this chapter.
●
If the result is not satisfactory, continue with the procedure.
3.
Insert the CD in the disc drive. The CD menu is displayed.
4.
Select Open Auto-Adjustment Software. The setup test pattern is displayed.
5.
Press the
-/Auto
button on the monitor front panel to produce a stable, centered image.
6.
Press the
ESC
key or any other key on the keyboard to exit the test pattern.
ENWW
Using the Auto-Adjustment Function
13
Advertising
This manual is related to the following products: