HP Photosmart 6221 - Manual (Page 9)

2 Transfer and print images
You can use your dock to transfer images to a computer and to print them directly to a
printer.
Transferring images to a computer
The way you transfer images may vary somewhat depending on the following factors.
●
Windows or Mac computer
● Version of the operating system
● Whether or not the HP Photosmart Software is installed
Note If you are using Windows 98 or Me, you must install the HP
Photosmart Software to transfer images.
● Whether the camera's USB Configuration is set to Digital Camera or Disk
Drive . Refer to your camera electronic User Guide for more information.
1. Connect the dock to the computer using the USB cable.
2. Place the camera in the dock and turn it on.
3. Press either the on the dock or the OK button on the remote.
4. Follow the directions on your computer screen. Refer to the on-screen help for
more information.
Printing images
1. Connect the dock to the printer's PictBridge port (usually on the front of the
printer).
2. Set the camera's USB Configuration setting to Digital Camera (see the camera
electronic User Guide).
3. Insert the camera into the camera dock and turn on the camera.
The
Print Setup menu displays on the camera. If you already selected images to
print in the camera, the number of images selected will be shown in the Print
Setup menu. Otherwise, Images: ALL will be displayed.
4. If all the settings in the Print Setup menu look correct, press the Menu/OK
button on the camera to begin printing. Or, you can change settings in the Print
Setup menu using the arrow keys on the camera, then press Menu/OK to begin
printing.
5. When the printing completes, you can leave the camera in the dock to recharge
the camera battery.
6 HP Photosmart 6221 Premium Camera Dock