Hitachi 60VS810A - Manual (Page 4)

ACCESSORIES
4
Check to make sure you have the following accessories before disposing of the packing material.
FIRST
TIME USE
REMOTE CONTROL BATTERY INSTALLATION AND REPLACEMENT
1. Open the battery cover of the remote control by pushing the notched
part of the cover with your fingers and pulling the cover off.
2. Insert two new “AA” size batteries for the remote control. When
replacing old batteries, push them towards the springs and lift them out.
3. Match the batteries to the (+) and (-) marks in the battery compartment.
4. Replace the cover.
BOTTOM VIEW
Lift up on tab to
remove back cover.
(Remote Control)
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace with the same or equivalent type.
1.
2.
3.
GUIDE
C.C.
REMOTE CONTROL BATTERIES
(“AA”)
CLEANING CLOTH
1. Remote Control Unit CLU-3842WL (Part No. HL02062) or CLU-3844WL (Part No. HL02064).
2. Two “AA” size, 1.5V batteries (For Remote Control Unit).
3. Cleaning Cloth (P# MS00931).
OPTIONAL LCD REAR PTV STAND
(NOT INCLUDED, ORDER SEPARATELY)
CAUTION: 1. This SPF50 LCD stand for use only with Hitachi 50VS810/50VS810A. Use with other apparatus is capable of
resulting in instability causing possible injury.
2. This SPF60 LCD stand for use only with Hitachi 60VS810/60VS810A. Use with other apparatus is capable of
resulting in instability causing possible injury.
3. This SPF70 LCD stand for use only with Hitachi 70VS810. Use with other apparatus is capable of
resulting in instability causing possible injury.
LCD TV MODEL LCD STAND/PART NO.
50VS810/50VS810A SPF50 / QJ01521
60VS810/60VS810A SPF60 / QJ01581
70VS810 SPF70 / QJ01591
CUSTOM HITACHI TELEVISION STAND
Excellent for VCR and video tape storage.