Rtc battery, Rtc battery –22 – HP DV3 User Manual
Page 84
4–22
Maintenance and Service Guide
Removal and replacement procedures
RTC battery
Before removing the RTC battery, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the wireless module compartment cover (see
).
6. Remove the SIM slot board (see
Remove the RTC battery:
1. Detach the RTC battery 1 from the base enclosure and release the RTC battery as far as the RTC battery cable
allows. (The RTC battery is attached to the base enclosure with double-sided tape.)
2. Disconnect the RTC battery cable 2 from the system board.
3. Remove the RTC battery.
Reverse this procedure to install the RTC battery.
Description
Spare part number
RTC battery (includes cable and double-sided tape)
531829-001