Hitachi VT-FX614A - Manual (Page 31)

PRE-TUNING THE VCR TUNER - 31 -
<CATV1> Ordinary cable
<ANT> Internal or external antenna
<CATV2> Alternate cable (If CATV1 doesn't give you the channels you expect).
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
6 Press the (2) button.
The VCR will automatically store channels received in your area. It takes about 2 - 3 minutes. After the channels
are stored in memory, the channel with the lowest number appears in the VCR's display.
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
7 Press GUIDE to return to regular viewing.
Note: Your VCR is capable of receiving 68 broadcast TV channels (VHF 2-13, UHF 14-69) and cable channels
(1-125). In some areas channels cannot be received when CATV1 is selected. In this case, select CATV2 in the
receiving setup.
•
When automatic presetting of channels are finished
Press the CH (channel) button (or numbered buttons) to check the channels you can receive.
Note: If no channels have been set or a clear picture does not appear, check the antenna or cable connection.
•
Channel Caption (Station Identifier)
When your VCR is receiving a channel caption signal that is transmitted by a local broadcasting station together