Horizon Fitness HZ SERIES T25 - Manual (Page 13)

23 12
QUICK START UP
Simply press the Start button to begin exercising.
PAUSE
Press the Stop button to pause your workout.
RESET
Press and hold the Stop button to reset the treadmill.
Console Features & Display
T35 View
T25 View
T35 View
T25 View
Horizon Fitness treadmills are designed to be reliable and easy to use. However, if you experience a
problem, please reference the troubleshooting guide listed below.
PROBLEM: The console does not light up.
SOLUTION: Verify that the power cord is plugged in properly to the outlet, and that the treadmill
switch is turned on.
PROBLEM: The treadmill circuit breaker trips during a workout.
SOLUTION: Verify that the treadmill is plugged into a dedicated 20amp circuit.
NOTE: no extension cord.
PROBLEM: The treadmill shuts off when elevating
SOLUTION: Verify that there is enough slack in the power cord to reach to the wall outlet during ele-
vation.
PROBLEM: The running belt does not stay centered during a workout.
SOLUTION: Verify that the treadmill is on a level surface. Verify that the belt is properly tightened
(refer to Centering The Belt.)
PROBLEM: The treadmill makes a clicking noise towards the front of the machine while walking or
running on it.
SOLUTION: For optimum use, the treadmill needs to be level. Refer to the section on leveling your
treadmill.
T25_T35 owner’s guidev1.0.qxd 6/17/2004 2:28 PM Page 13