Honeywell RAPID EYE K5404V9 - Manual (Page 45)

4–1
4 Troubleshooting Video
4.1 Adjusting a Video Feed
Camera attributes of video feed
To adjust the video feed of cameras, ask your Multi-Media system administrator (Multi
SA) or View operator that has the right to run maintenance sessions. Video feeds are
adjusted individually for each camera while running a maintenance session.
You can adjust a video feed’s:
•
brightness
•
contrast
•
hue
•
saturation
•
gain (AGC)
Fig. 34. The Motion and PTZ selections show different controls.
Honeywell recommends you leave the gain to automatic.
To do so leave/set a checkmark in the AGC box on the Video tab, during a
maintenance session.