HP 2000491 - Manual (Page 111)

Connecting Video Equipment 105
Connecting V
ideo
Equipment
Recognizing the digital video camcorder
If the HP Digital Entertainment Center does not recognize
your digital video camera:
1 Start up the HP Digital Entertainment Center. See
“Initial Configuration” on page 121.
2 Click Start, and then click Control Panel.
3 Click Performance and Maintenance,
if available, and then double-click the System icon.
4 Click the Hardware tab, and then click the Device
Manager button.
5 Click the plus sign (+) next to imaging devices. If the
name of the camera appears under imaging devices
the device is ready. If the name is not there, try the
following:
■ Click Action, and then Scan for hardware
changes. Look in Device Manager for a new
addition under imaging devices.
■ Unplug the video camera’s transfer cable from
the HP Digital Entertainment Center. Power cycle
the camera and plug it back in. Look in Device
Manager for a new addition under imaging
devices.
For more information about viewing your pictures or
digital video files in Media Center or copying your
pictures to CD, see the Software Guide.