Hayter Mowers R53S - Manual (Page 5)

• Replace faulty silencers.
• If the fuel tank has to be drained, do this outdoors.
• Do not change the engine governor settings or
overspeed the engine. Operating an engine at
excessive speed can increase the hazard of personal
injury.
• Be careful during adjustment of the lawn mower to
prevent entrapment of the fingers between moving
cutterblades and fixed parts of the lawn mower.
• To ensure the best performance and safety,
purchase only genuine replacement parts
and accessories. Do not use
will fit parts and
accessories; they may cause a safety hazard.
Sound Pressure
Code 448E: This unit has an equivalent continuous
A-weighted sound pressure level at the operator ear of
88 dBA, based on measurements of identical machines
per EN ISO 11201 and EN 836.
Code 449E: This unit has an equivalent continuous
A-weighted sound pressure level at the operator ear of
90 dBA, based on measurements of identical machines
per EN ISO 11201 and EN 836.
Sound Power
Code 448E: This unit has an equivalent continuous
A-weighted sound power level of 100 dBA, based on
measurements of identical machines per ISO 11094.
Code 449E: This unit has an equivalent continuous
A-weighted sound power level of 98 dBA, based on
measurements of identical machines per ISO 11094.
Vibration, Hand/arm
Code 448E: This unit does not exceed a hand/arm
vibration level of 5.13 m/s
2 , based on measurements of
identical machines per EN 1033 and EN 836.
Code 449E: This unit does not exceed a hand/arm
vibration level of 4.10 m/s
2 , based on measurements of
identical machines per EN 1033 and EN 836.
Safety and Instructional Decals
Important: Safety and instruction decals are located near areas of potential danger. Replace damaged
decals.
104-7953
1. Warning—read the Operator’s Manual for information on charging the battery; contains lead; do not discard.
2. Read the Operator’s Manual.
Manufacturer’s Mark
1. Indicates the blade is identified as a part from the original
machine manufacturer.
117-4157
1. Engine—stop
5