HANNspree LT16-26U1-000 - Manual (Page 27)

26
2.1.2 Connecting an Antenna or Cable TV
1 Connect one end of the VHF/UHF (Antenna) or CATV cable to ANT
Jack (RF-in Analog) on the back of the TV.
2
Connect the other end of the VHF/UHF (Antenna) or CATV cable to
the antenna socket or CATV socket.
Notes:
• If you cannot receive channels after connecting to an antenna or cable
TV line, try scanning for channels. See “Auto Search” on page 80.
• RF-in digital input is available for built-in DTV models only.
ANT jack
Antenna
Antenna/CATV
socket
coaxial cable
(TV/CATV RF)
Ground
Ground
Clamp