Husqvarna 333R - Manual (Page 32)

32 – English
TECHNICAL DATA
Technical data
Note 1: Equivalent noise pressure level is calculated as the time-weighted energy total for noise pressure levels under
various working conditions with the following time distribution: 1/2 idle and 1/2 max. speed.
NOTE! Noise pressure at the user’s ear and vibration on the handles are measured with all the machine’s approved
cutting equipment fitted. The table indicates the highest and lowest values.
Technical data 333R 335FR 335RX
Engine
Cylinder displacement, cu.in/cm
3
2,11/34,6 2,11/34,6 2,11/34,6
Cylinder bore, inch/mm 1,50/38,0 1,50/38,0 1,50/38,0
Stroke, inch/mm 1,20/30,5 1,20/30,5 1,20/30,5
Idle speed, rpm 2900 2900 2900
Recommended max. fast idle speed, rpm 11500 11500 11500
Speed of output shaft, rpm 8220 8220 8220
Max. engine output, acc. to ISO 8893, kW/ rpm 1,6/8400 1,6/8400 1,6/8400
Catalytic converter muffler Yes Yes Yes
Speed-regulated ignition system Yes Yes Yes
Ignition system
Manufacturer/type of ignition system Walbro MB Walbro MB Walbro MB
Spark plug Champion RCJ 6Y Champion RCJ 6Y Champion RCJ 6Y
Electrode gap, inch/mm 0,02/0,5 0,02/0,5 0,02/0,5
Fuel and lubrication system
Manufacturer/type of carburetor Zama C1Q Zama C1Q Zama C1Q
Fuel tank capacity, US pint/litre 1,27/0,6 1,27/0,6 1,27/0,6
Weight
Weight without fuel, cutting attachment and guard,
Lbs/kg
13,4/6,1 13,4/6,1 13,7/6,2
Sound levels
(see note 1)
Equivalent sound pressure level at the user
′s ear,
measured according to ANSI B175.3-1997, dB(A),
min/max: 96/102 95/102 95/102
Vibration levels
Vibration levels at handles, measured according to
ANSI B175.3-1997, m/s
2
At idle, left/right handles, min.: 3,0/2,8 2,1/2,0 2,0/1,9
At idle, left/right handles, max.: 3,2/3,1 2,1/2,0 2,7/2,3
At max. speed, left/right handles, min.: 2,9/3,4 2,7/3,2 2,4/1,8
At max. speed, left/right handles, max.: 4,2/5,1 2,9/3,8 2,7/2,7