Hitachi 50VG825 - Manual (Page 65)

65
On-Scr
een Display
Select CHANNEL MANAGER to set your Antenna
options, run Auto Channel Scan, Check Signal Meter
and Set Channel List.
1. Use the CURSOR PAD ̆ or ̄ to highlight the
function to be adjusted.
2. Press the SELECT button or CURSOR PAD
̈
to
select.
Signal Meter
Select SIGNAL METER when using an indoor or
outdoor antenna. This feature will show the signal
strength and peak values of the Antenna signal to help
you adjust your antenna to optimize signal reception.
1. Use the CURSOR PAD
̆
or
̄
to highlight
SIGNAL METER.
2. Press the SELECT button to select.
NOTE: The Signal Meter will not be available (grayed
out) when watching analog channels.
Channel List
Auto Channel Scan
Signal Meter
Channel Manager
Move SEL Return
Signal Meter
Channel Manager
Move SEL Return
Channel 15-1
Strength 91
Peak 91
Close
Channel List
Auto Channel Scan
Signal Meter
Channel Manager
Move SEL Return
Move SEL Select
Setup
Timers
Locks
Channel Manager
Audio
Video
or
Channel Manager
Channel Manager