Hitachi CP-X1230 - Manual (Page 33)

33
Multifunctional Settings (continued) Multifunctional Settings (continued)
Item Description
SERVICE
Pressing the (or the ENTER) button calls the SERVICE
menu.
SERVICE Menu
Select an item using the
/ buttons, and press the
(or the ENTER) button to per form each function. :
FANSPEED AUTO ADJUST LENS LOCK
FANSPEED
Select the fan speed level using the / buttons. :
HIGH NORMAL
The HIGH ups rotation speeds of fans, though. Please use this
function in using a projector at highlands etc.
memo Note that the projector is noisier when the HIGH is
selected.
AUTO
ADJUST
Select the ENABLE or the DISABLE using the / buttons. :
ENABLE DISABLE
When the ENABLE is selected, detecting a signal change to a
RGB signal performs the automatic adjustment of the vertical
position (V POSITION), the horizontal position (H POSITION),
the clock phase (H PHASE) and the horizontal size (H SIZE).
Depending on conditions, such as input image, signal cable to
the unit, environment around the unit, etc., the automatic
adjustment may not work correctly. In such a case, please
choose DISABLE to disable the automatic adjustment, and
adjust manually.
LENS LOCK
Select the TURN ON or the TURN OFF using the /
buttons. :
TURN ON TURN OFF
Selecting the TURN ON locks the adjustment of the zoom and
the focus.
RESET
Select the EXECUTE using the button to reset the OPTION menu items. :
EXECUTE CANCEL
The items of the OPTION menu are collectively returned to the initial setting.
Note that the items “VOLUME”, “LAMP TIME”, “FILTER TIME” and “SERVICE” are not reset.
: SELECT
SERVICE
FANSPEED
AUTO ADJUST
LENS LOCK
NORMAL
ENABLE
TURN OFF
OPTION Menu (continued)