Showing presentations – HP L1581A User Manual
Page 23
User’s Guide
23
Presenting from a Networked Computer
6. For an Ad Hoc connection, set the following properties:
■
Set the Authentication Mode to Ad Hoc.
■
Match the Desired SSID and WEP Encryption to the settings on the projector.
■
If a channel setting is available, set the channel to Auto.
For an Infrastructure connection, set the following properties:
■
Set the Authentication Mode to Infrastructure.
■
Match the Desired SSID and WEP Encryption to the access point settings as
specified by the network administrator.
■
If a channel setting is available, set the channel to Auto.
7. Click OK.
8. Right-click Wireless Network Connection again, and click Properties.
9. Double-click TCP/IP. For each type of connection, use the following values:
■
For an Ad Hoc connection, set the following properties:
❏
Select Obtain an auto IP address.
❏
Select Obtain DNS server address automatically.
■
For an Infrastructure connection, check with your system administrator
to obtain the correct settings.
Showing Presentations
This section describes how to show presentations on a computer.
■
“To start a presentation” on page 24
■
“To stop showing your presentation” on page 25
■
“To include other presenters” on page 26
■