HP L1581A - Manual (Page 48)

48 User’s Guide
Maintaining the System
To manage the projector using the on-screen menu
The projector’s on-screen menu is described in detail in the projector manual.
However, when you install a connectivity module, certain new menu entries
are displayed in the on-screen menu.
New menu entries with module installed
Quick choice
Wireless Presenter Displays information needed by Wireless
Presenter-to-Go so it can connect to the projector.
Input (This menu was named “Connect” in early firmware
versions.)
Connectivity module Shows the input signal from the current wired or
wireless presenter.
Setup
Enable sources
Connectivity module
Sets whether input sources connected to the
connectivity module are searched or ignored when
the projector searches for an input.
Help
About the network Displays the current configuration of the wired and
wireless network ports on the connectivity module.
The wireless configuration and certain wired
settings must be changed using the Web interface.
See “To manage the projector from the Web” on
page 49.