Hitachi VT-FX630A - Manual (Page 35)

35
............................................................................................................................................................
2 Press the (2) button to select the VCR SETUP operation.
Remote Control Illustration.
............................................................................................................................................................
3 Press the (6) button to set the SAP option to "ON".
............................................................................................................................................................
4 Press the (5) button to set the STEREO/MONO option to "STEREO".
............................................................................................................................................................
5 Press the GUIDE button to end the setting.
............................................................................................................................................................
6 Follow the Step 1 through 6 on "Basic Recording Steps" on pages 32 and 33.
•
Stereo vs. mono sound
When you select the STEREO option in the initial setup operation, your VCR records in stereo any station that
broadcasts stereo sounds. When a TV channel broadcasts in stereo, you'll see a stereo indicator on the TV
screen.
Set to MONO if the stereo signal is weak and the sound is too "noisy".