HP SCANJET G 3010 - Manual (Page 4)

1 Get started
Follow these steps to set up the scanner:
●
Step 1. Check the box contents
● Step 2. Install the software
● Step 3. Connect the power supply
● Step 4. Connect the USB cable
● Step 5. Test the installation
Step 1. Check the box contents
Unpack the scanner hardware. Be sure to remove any shipping tape.
A
B C
D
E
A HP Scanjet G3010 scanner
B USB cable
C Power supply
D Setup poster or optional Setup and Support Guide
E Scanning software CDs
Step 2. Install the software
Caution If you are installing the software onto a Windows computer, do not
connect the USB cable to the computer yet. Install the scanning software before
connecting the USB cable. If you are installing the software into a Macintosh
computer, you can connect the USB cable either before or after installing the
software.
2 HP Scanjet G3010