Hobie Wave BP250 - Manual (Page 5)

•
5
Locate the tiller crossbar and
identify the left and right hand
ends. NB: the tiller crossbar (1)
locates on top of the tiller/rudder
arms (2).
Locate the tiller connector kits
and install as shown on the pho-
tographs.
Identify the right and the left rudders. Green sticker for the right, red sti-
cker for the left. Attach these to the boat using the two aluminium rud-
der pins and split rings provided.
RUDDER
Rudder system assembly
1
2
Tiller crossbar and extension
Locate the tiller extension and secure it to the tiller
crossbar using the clevis pin and ring clip provided.
1
2
3