Horizon Fitness E70 - Manual (Page 22)

21
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE
YOU
BEGIN
ELLIPTICAL OPERA
TION
LIMITED
W
ARRANTY
TROUBLESHOOTING
&
MAINTENANCE
CONDITIONING
GUIDELINES
Your Horizon Fitness elliptical is designed to be reliable and maintenance free. However, if you do experience
problems with your elliptical, please reference the troubleshooting guide listed below.
PROBLEM:
There is no display on the console.
PROBLEM: PROBLEM:
SOLUTION: Remove the console and verify that the console cable is attached properly, SOLUTION: SOLUTION:
making sure that the cable is securely inserted into the console. Also, check power cords to
ensure they are properly plugged in.
PROBLEM: The elliptical makes a squeaking or chirping noise.
SOLUTION:
Loosen all bolts attached during the assembly process, grease the threads and
SOLUTION: SOLUTION:
tighten again.
PROBLEM:
The resistance levels seem to be incorrect, seeming too hard or too easy.
PROBLEM: PROBLEM:
SOLUTION: Reset the console and allow the resistance to reset to the default position.
Restart the console and retry the resistance levels.
PROBLEM: Roller wheels appear to be leaving particles on the guide rails. PROBLEM: PROBLEM:
SOLUTION: This is considered normal wear of the elliptical wheels. To remove, simply wipe SOLUTION: SOLUTION:
off the roller wheels and guide rails with a damp cloth.
If following the troubleshooting section does not remedy the
problem, discontinue use and turn the power off.
DO NOT return the treadmill to the store.
PLEASE CALL CUSTOMER TECH SUPPORT
AT THE NUMBER ON THE BACK PANEL.
TROUBLESHOOTING