HP Bluetooth Stereo Headphones - Manual (Page 8)

HP iPAQ Bluetooth Stereo Headphones User’s Guide 8
Reestablishing Connection to the
Headphones
Once your headphones have made an initial pairing with the iPAQ
Pocket PC, you can reestablish the connection easily:
1. Verify that the iPAQ Pocket PC Bluetooth Radio is turned on.
2. Turn on the headphones by holding down the Multi Function
button for about two seconds, until the blue light flashes.
3. On the iPAQ Pocket PC, play the audio file.
4. Press the Multi Function button on the right earpiece of the
headphones. They will re-connect with the Pocket PC and
you will hear audio through the headphones.
Note: You can also reconnect the headphones with the iPAQ
pocket PC by going to the Bluetooth Manager and double tapping
the High Quality Audio on BT-Headphones
Turning the Headphones On and Off
To turn the Bluetooth Headphones on, push and hold the Multi
Function button for two seconds until the blue light flashes.
To turn the Bluetooth Headphones off, press and hold the Multi
Function button for two seconds, until the light flashes red and
goes off.
Using the HP iPAQ Bluetooth Stereo
Headphones
To play a song or other audio file, ensure that the headphones
have a Bluetooth connection with the Pocket PC and simply play
the file on your iPAQ Pocket PC.