HoMedics BPA-101 - Manual (Page 7)

12 11
Connect AC
adapter here
Replace the batteries in pairs. Remove batteries when
unit is not in use for extended periods of time.
Note: Batteries are hazardous waste. Do not dispose
of them together with the household garbage.
USING THE AC ADAPTER
Note: • Please unload the batteries when operating
with the AC adapter for an extended period
of time. Leaving the batteries in the compartment
for a long time may cause leakage, which
may lead to damage of the unit.
• No batteries are needed when operating
with the AC adapter.
1. Connect the AC adapter with the AC adapter jack
in the back of the unit as shown below.
2. Please use only the AC adapter included
with this monitor.
INSTALLING BATTERIES
1. Press down on latch and lift the battery cover
towards you to open the battery compartment.
2. Install or replace 4 “AA” sized batteries in the bat-
tery compartment according to the indications
inside the compartment.
3. Replace the battery cover by clicking in the bot-
tom hooks first, then push in the top end of the
battery door.
Replace the batteries if:
1. The weak battery symbol appears on the display.
2. Nothing appears on the display when the power is
switched on.
As the supplied batteries are for test only, they may be
discharged earlier than batteries you buy in stores.
AC Adapter
Input: 120V 60Hz 15W
Output: 12V DC 600mA
BPA-101IB_ENGSP.qxd 10/24/05 11:00 AM Page 11