Troubleshooting – HONDA 2010 Insight Navigation User Manual

Page 134

Advertising
background image

Navigation System

133

Troubleshooting

Screen Error Message

Solution

Navigation system is unable to acquire a proper GPS signal.

Make sure there is nothing on the dashboard blocking the GPS antenna
(aftermarket metallic window tinting or aftermarket devices placed on the

dashboard, like radar detectors, cell phones, or loose items). If the dashboard

is clear of objects, move the vehicle to an open space away from tall buildings,
trees, etc.

Navigation unit door is open or No DVD disc is inserted.

Please check system.

Make sure that the navigation DVD disc is inserted with the label side up

and the navigation unit door is fully snapped closed (see page 105).

No DVD disc. Please check system.

Check that the navigation DVD disc is inserted with the label side up (see

page 105). If the problem persists, see your dealer.

DVD disc reading error (unformatted). Please consult your
dealer.

Check the DVD disc surface for deep scratches or other damage. Make sure
you are using a navigation DVD (turquoise-colored [blue/green] label). The

system cannot read other mapping databases or video DVDs. If the problem

persists, see your dealer.

Display temp is too high. System will shut down until display

cools down.

This message will appear briefly when the display temperature is too high,

and then the display will turn off until the temperature cools down. The

system will turn back on when the display cools down.

Outside temperature is low. System will take a while to start

up.

The temperature is below -22°F and the navigation system has difficulty

reading the DVD. The system will start up when the temperature warms up.

Navigation system voice recognition cannot be activated
when another unit is using the audio system.

HandsFreeLink (HFL) can override the navigation system. Make sure the
HFL TALK

button is not on when you press the NAVI TALK button, or the

message will appear. Simply press the HFL BACK button to resume

control of the navigation voice buttons.

Route has not been completed. Please try again from a

different location.

This message will appear when you are routing to or from a place (new

area) that is not in the database. Try planning a different route to or from a

different location.*

Advertising
This manual is related to the following products: