Technical data – Husqvarna 334T User Manual
Page 36
36 – English
TECHNICAL DATA
Technical data
Note 1: Noise emissions in the environment measured as sound power (L
WA
) in conformity with EC directive 2000/14/EC.
Note 2: Equivalent sound pressure level, according to ISO 7182, is calculated as the time-weighted energy total for noise
pressure levels under various working conditions with the following time distribution: 1/3 idling, 1/3 max. load, 1/3 max.
speed.
Note 3: Equivalent vibration level, according to ISO 7505, is calculated as the time-weighted energy total for vibration
levels under various working conditions with the following time distribution: 1/3 idling, 1/3 max. load, 1/3 max. speed.
334T
338XPT
Engine
Cylinder displacement, cm
3
35,2
39
Cylinder bore, mm
38,0
40
Stroke, mm
31
31
Idle speed, rpm
2800
2800
Recommended max. speed, rpm
13800
13800
Power, kW/ rpm
1,5/9600
1,7/9600
Ignition system
Manufacturer of ignition system
SEM
SEM
Type of ignition system
CD
CD
Spark plug
NGK BPMR 7A/
Champion RCJ 7Y
NGK BPMR 7A/
Champion RCJ 7Y
Electrode gap, mm
0,5
0,5
Fuel and lubrication system
Manufacturer of carburettor
Zama
Zama
Carburettor type
C1Q EL33
C1Q EL33
Fuel tank capacity, litre
0,34
0,34
Oil pump capacity at 8,500 rpm, ml/min
3-7
3-7
Oil tank capacity, litre
0,14
0,14
Type of oil pump
Automatic
Automatic
Weight
Chain saw without bar or chain, empty tanks, kg
3,5
3,5
Noise emissions (see note 1)
Sound power level, measured dB(A)
110
110
Sound power level, guaranteed L
WA
dB(A)
111
111
Sound levels (see note 2)
Equivalent sound pressure level at operator’s ear, measured
according to relevant international standards, dB(A)
102
102
Vibration levels (see note 3)
Front handle, m/s
2
3,0
3,0
Rear handle, m/s
2
3,5
3,5
Chain/bar
Standard bar length, inch/cm
14"/34
14"/34
Recommended bar lengths, inch/cm
12-14”/30-35
12-16”/30-40
Usable cutting length, inch/cm
11-13”/28-33
11-15"/28-38
Chain speed at max. power, m/sec
18,3
18,3
Pitch, inch/mm
3/8" /9,52
3/8" /9,52
Thickness of drive links, inch/mm
0,050/1,3
0,050/1,3
Number of teeth on drive sprocket
6
6