Humminbird 998c SI - Manual (Page 79)

69 Combo Views
Combo Views
Combo Views display two views on the screen at the same time. You can
perform functions for either side of the view, access the X-Press™ Menu,
and change the left view display size. The available combo views are shown
on the following pages.
Combo Views: Functions
The Combo Views allow you to view and control two views at once. To
change the settings in a View, the view must be selected as the active side.
• The green arrow points to the active side.
• Active Side: Press the MENU key once and select Active Side from
the X-Press™ Menu. Choose RIGHT or LEFT to set the active side.
• X-Press™ Menu: After you set the Active Side, press the MENU key
once to access the X-Press™ Menu. The X-Press™ Menu provides
settings for the active view, and the display updates immediately
with your changes.
• Display Size: Press the MENU key once and select Split Position
from the X-Press™ Menu. Split Position allows you to adjust the size
of the left side of the display.
• Active Cursor: Press any arrow on the 4-WAY Cursor Control key, and
the cursor will appear on the active side of the view.
Side Imaging ® /Sonar Combo View (898c SI and 998c SI only)
Side/Sonar Combo View shows sonar information and Side Imaging® sonar
information in a combination split screen.
Side/Sonar Combo View
Depth Shadows 1 6
Topography Changes 7
Water Surface Temperature Bottom Return 3 8
Speed Green Arrow: Active Side 4 9
Water Column 5 10
1
4
3
2
5
6
7
8
9
Course: Bearing of Boat with Respect to North Reference 2