HP ZE4900 - Manual (Page 89)

5–6 Maintenance and Service Guide
Removal and Replacement Procedures
5. Remove the hard drive by following these steps:
a. Remove the 2 rubber screw covers 1 that conceal the hard
drive retention screws.
✎
Spare part number 371808-001 should be used to replace
the hard drive rubber screw covers.
b. Remove the 2 PM2.0×6.0 screws 2 that secure the hard
drive to the notebook.
c. Use the notch in the hard drive bezel to slide the hard
drive forward 3.
d. Remove the hard drive.
Removing the Hard Drive
Spare Part Number Information
Hard drives (all 4200 rpm)
60-GB
40-GB
30-GB 371778-001
371777-001
371776-001