Handspring VisorPhone - Manual (Page 92)

86 Troubleshooting and Maintenance
My VisorPhone
requires an
unlocking code,
but I didn't set
one
■ Your service provider may have set the locking code
before you received your VisorPhone. Enter the
default unlocking code (this is usually 1234 or 1111)
and then tap OK. If this doesn't work, contact your
service provider.
Note: It is actually your SIM card that is locked, not
your VisorPhone.
■ If you see the Unblock Phone screen instead of the
Unlock Phone screen, you entered the unlock code
incorrectly three times, and your VisorPhone is now
blocked. Contact your service provider to obtain the
unblock code. If you enter the unblock code
incorrectly ten times, your SIM is permanently
disabled.
I called my
service provider
to enable my
phone service,
but it still
doesn’t work Some service providers require 24 hours or more to
activate your phone service. If it has been longer than
your service provider’s activation period, report the
problem to your service provider.