Husqvarna 354XP - Manual (Page 35)

English –
35
262XP
3,8/62
1,89/48
1,34/34
2 700
13 500
3,4/9 600
FHP
ET
Champion
RCJ 7Y
0,020/0,5
Walbro
HDA120
1,2/0,6
6,5-13,5
0,6/0,3
Automatic
12,7/5,8
262XP
111
112
100
4,0
8,2
15"/38
13-20"/33-51
11-19"/30-49
18,5
0,325"/8,25
3/8"/9,52
0,050"/1,3
0,058"/1,5
7
TECHNICAL DATA
Engine
Cylinder volume, cu.in/cm 3
Cylinder bore, inch/mm
Stroke, inch/mm
Idle speed, rpm
Recommended max.
speed, unloaded, rpm
Power, kW
Ignition system
Manufacture
Type of ignition system
Spark plug
Electrode gap, inch/mm
Fuel and lubrication system
Manufacturer
Carburettor type
Fuel capacity, US pint/litre
Oil pump capacity at 8500 rpm,
ml/min
Oil capacity, US pint/litre
Type of oil pump
Weight
Without bar and chain, Lbs/kg
Bar and chain combinations
The following combinations are CE approved.
Bar Chain
Length, Pitch, Max.
inches inches tip radius
13 0,325 10T Husqvarna H30
15 0,325 10T Husqvarna H30
16 0,325 10T Husqvarna H30
18 0,325 10T Husqvarna H30
13 0,325 10T Husqvarna H25
15 0,325 10T Husqvarna H25
16 0,325 10T Husqvarna H25
18 0,325 10T Husqvarna H25
13 0,325 10T Husqvarna H21
15 0,325 10T Husqvarna H21
16 0,325 10T Husqvarna H21
18 0,325 10T Husqvarna H21
15 3/8 11T Husqvarna H42
16 3/8 11T Husqvarna H42
18 3/8 11T Husqvarna H42
20 3/8 11T Husqvarna H42
Noise emissions
(see note 1)
Sound power level, measured
dB(A)
Sound power level, guaranteed
L
WA
dB(A)
Sound levels
(see note 2)
Equivalent sound pressure level
at operator’s ear, measured
according to relevant internatio-
nal standards, dB(A)
Vibration levels
(see note 3)
Front handle m/s
2
Rear handle m/s 2
Chain/bar
Standard bar length, inches/cm
Recommended bar lengths,
inches/cm
Usable cutting length, inches/cm
Chain speed at max.
power, m/sec
Pitch, inches
Thickness of drive link, inch/mm
Number of teeth on drive
sprocket
Type Inch Inch/mm Inch/mm Degree° Degree° Degree° Inch/mm Inch/cm: dl
H30 0,325" 0,050"/1,3 3/16" /4,8 85° 30° 10° 0,025"/0,65 13"/33:56 15"/38:64
16"/40:66 18"/45:72
H25 0,325" 0,058"/1,5 3/16" /4,8 85° 30° 10° 0,025"/0,65 13"/33:56 15"/38:64
H21 16"/40:60 18"/45:72
H42 3/8" 0,058"/1,5 7/32" /5,5 60° 25° 10° 0,025"/0,65 15"/38:56 16"40:60
18"/45:68 20"/50:72
L
1
5
Note 1: Noise emissions in the environment measured as sound
power (L
WA
) in conformity with EC directive 2000/14/EC.
Note 2: Equivalent sound pressure level, according to ISO
7182, is calculated as the time-weighted energy total for sound
pressure levels under various working conditions with the
following time distribution: 1/3 idling, 1/3 max. load, 1/3 max.
speed.
Note 3: Equivalent vibration level, according to ISO 7505, is
calculated as the time-weighted energy total for vibration levels
under various working conditions with the following time
distribution: 1/3 idling, 1/3 max. load, 1/3 max. speed.