Connecting external video sources – Hitachi EX Series 60EX01B User Manual

Page 16

Advertising
background image

CONNECTING EXTERNAL VIDEO SOURCES

16

CONNECTING A STEREO LASERDISC PLAYER OR DVD PLAYER TO INPUT 2.

1. Connect the cable from the Y OUT of the Laserdisc or the DVD player to the INPUT 2 (Y) jack as shown on the TV set below.

2. Connect the cable from the C OUT or B-Y OUT of the Laserdisc or the DVD player to the INPUT 2 (C ) jack, as shown on the TV

set below.

3. Connect the cable from the C OUT or R-Y OUT of the Laserdisc or the DVD player to the INPUT 2 (C ) jack, as shown on the TV

set below.

4. Connect the cable from the AUDIO OUT R of the Laserdisc or DVD player to the INPUT 2 (AUDIO/R) jack.

5. Connect the cable from the AUDIO OUT L of the Laserdisc or DVD player to the INPUT 2 (AUDIO/L) jack.

6. Press the INPUT button until VIDEO:2 appears, to view the program from the Laserdisc or DVD player. The VIDEO:2 icon disap-

pears automatically after approximately eight seconds.

7. Press the INPUT button to return to the previous channel.

NOTE:

Completely insert the connection cord plugs when connecting to rear panel jacks. The picture that is played back will be
abnormal if the connection is loose.

See page 12 for tips on REAR PANEL CONNECTIONS.

INPUT 2

TV INPUT 2

TERMINAL

(MONO)

VIDEO

AUDIO

L

R

Y CB CR

COMPONENT VIDEO

BACK OF DVD PLAYER

HITACHI model

or similar model

Y C C

R L

AUDIO

VIDEO

OUTPUT

B

R

S-VIDEO

B

R

R

B

Advertising
This manual is related to the following products: