Diagnostics, Oam loopback, Chapter 7 diagnostics – HP 6212 User Manual
Page 77: 1 oam loopback
6212-A2-GB20-00 May 2004 77
Chapter 7
Diagnostics
To access the Diagnostics screen, click on the Diagnostics button on the menu bar. The
Diagnostics screen has two test functions: OAM Loopback and Ping test.
7.1 OAM
Loopback
STEP 1: click on the Diagnostics button, on the menu bar.
STEP 2: Click on the Loopback tab on the Diagnostics screen.
STEP 3: Enter the following information to run the OAM loopback:
Flow type: F5 SEG (Segment to Segment) and F5 ETE (End-to-End). The SEG loopback
is from ATUR to DSLAM. The ETE loopback is from ATUR to the ISP RAS.
VPI and VCI: Specify the virtual channel that will run the OAM loopback.
Loopback ID: Type the loopback pattern for the loopback.
STEP 4: Click on the Start Loopback button at the bottom of the screen.