HONDA GX670R - Manual (Page 15)

12
1
2008.01.10 E
Work procedure
• As the work procedure is set with the work time according to the
method in the separate Service Manual, refer to this Manual as
required.
• Work methods permitting servicing in the shortest time still
permitting assurance of safe work and product warranty are used
for the setting of service items not listed in the Service Manual.
• Work basically is to be performed by one person, and when two or
more people are required, setting is done as the total time for the
number of people.
• The set value for the technological level of the workers uses a
person with three years of experience in the repair of Honda
products as the standard.
• Special tools and service equipment used to set FRT are those
specified or recommended in Service Manual.
Service item whose FRT is not presented
• Accessories and service parts that are not listed to use in this
manual.
• Locations with little aging deterioration or breakage during normal
use.
• Service work that can be finished by one touch.
• Service work that is seldom done (i.e. extremely small causes of
trouble and service frequency).
• Products and parts whose location for installation differs according
to its status of use and application.
* When FRT is not presented, please calculate wages based on ap-
propriate actual work time.
Operation not included of FRT
• Oil and coolant water drainig, Waiting time for warming up
operation and etc..
• Additional operation that involves removal/installation of standard
exterior equipment.
• Indirect time spent for service by visiting the customer, trade-in,
and delivery.
• Indirect time required for ordering and delivery of parts.
• Cost for grease, adhesive agent, etc. used for service work.
B12