HP ProLiant DL380 - Manual (Page 47)

Hardware options installation 47
If you are installing FBDIMMs in an online spare or mirrored configuration, use RBSU (" HP ROM-Based
Setup Utility " on page 62 ) to configure this feature.
For more information about LEDs and troubleshooting failed FBDIMMs, see "Systems Insight Display LEDs
and internal health LED combinations (on page 15 )."
Hot-plug SAS hard drive options
When adding hard drives to the server, observe the following general guidelines:
• The system automatically sets all device numbers.
• If only one hard drive is used, install it in the bay with the lowest device number (" SAS device
numbers " on page 16 ).
• Hard drives must be SFF types.
• Drives should be the same capacity to provide the greatest storage space efficiency when drives are
grouped together into the same drive array.
Installing a hot-plug SAS hard drive
1. Remove the SAS hard drive blank.