Husqvarna 125BT - Manual (Page 17)

English – 17
TECHNICAL DATA
Technical data
Note 1: Noise emissions in the environment measured as sound power (L
WA
) in conformity with EC directive 2000/14/EC.
Note 2: Equivalent sound pressure level is calculated as the time-weighted energy total for sound pressure levels under various
working conditions with the following time distribution: 1/2 idling and 1/2 max speed.
NOTE! The noise pressure level at operator’s ear and vibrations on the handles are measured with all the approved cutting
attachments for the machine. The table indicates the lowest and highest values.
Technical data 125BT 141B 155B 165BT
Engine
Cylinder displacement, cm
3
25,4 40,2 48,7 59,2
Cylinder bore, mm 34 40 44 47,1
Stroke, mm 28 32 32 34
Idle speed, rpm 3300 2500 2500 3000
Recommended max. speed: 7800 7500 7500 7500
Max. engine output, acc. to ISO 8893, kW/ rpm 0,7/7800 2,0/7500 2,2/7500 2,4/7500
Catalytic converter muffler No No No No
Ignition system
Type of ignition system Electronic Electronic Electronic Electronic
Spark plug NGK BPMR6A NGK BPMR 7A NGK BPMR 7A NGK BPMR 7A
Electrode gap, mm 0,5 0,6 0,6 0,6
Fuel and lubrication system
Manufacturer/type of carburettor Walbro, membran Walbro, membran Walbro, membran Walbro, membran
Fuel tank capacity, litre 0,5 1,6 2,1 2,2
Weight
Weight without fuel, cutting attachment and
guard, kg
5,0 9,9 10,2 12,3
Noise emissions
(see note 1)
Sound power level, measured dB(A) 101,3 103,5 106,7 104,6
Sound power level, guaranteed L
WA
dB(A) 102 104 107 112
Noise levels
(see note 2)
Equivalent noise pressure level at the operator’s
ear, measured according to EN/ISO 11806 and
ISO 7917, dB(A), min./max.:
92 89 92 97
Vibration levels
Vibration levels at handles, measured according
to EN/ISO 11806 and ISO 7916, m/s
2
At idle, left/right handles: -/1,2 1,2/1,2 1,2/1,0 1,2/1,2
At max. speed, left/right handles: -/1,2 1,2/1,2 1,2/1,7 1,2/1,2