Hotpoint VBXR1070 User Manual
Page 13
13
Customer Service
Troubleshooting T
ips
Operating Instructions
Safety Instructions
OPERATION
Possible Causes
What To Do
Washer pauses in cycle
The washer normally pauses
between washing steps
Washer won’t operate
Washer is unplugged
•
Make sure cord is plugged securely into a working outlet.
Water supply is turned off
•
Turn both hot and cold faucets fully on.
Controls are not set
•
Check controls and make sure Cycle knob is pulled out
properly
to ON position.
Lid is open
•
Close lid and pull Cycle knob out to ON position.
Circuit breaker/fuse is
•
Check house circuit breakers/fuses. Replace fuses or
tripped/blown
reset breaker. Washer should have separate outlet.
PERFORMANCE
Possible Causes
What To Do
Clothes too wet
Incorrect spin cycle
•
Make sure the spin cycle selected matches the load you
selected
are washing. Some fabrics will feel wetter when rinsed
with cold water.
Colored spots
Incorrect use of fabric
•
Check fabric softener package for instructions and follow
softener
directions for using dispenser.
•
Pretreat stain and rewash.
Dye transfer
•
Sort whites or lightly colored items from dark colors.
Grayed or yellowed
Not enough detergent
•
Use more detergent (especially with larger loads).
Hard water
•
Use a water conditioner like Calgon brand or install
a water softener.
Water is not hot enough
•
Make sure water heater is delivering water at
120°F.–140°F. (48°C.–60°C.).
Washer is overloaded
•
Select load size to match clothes load.
Detergent is not
•
Add detergent as wash basket fills with water before
dissolving
you load clothes.
Dye transfer
•
Sort clothes by color. If fabric label states wash separately,
unstable dyes may be indicated.
Lint or residue on
Clothes are air or line dried
•
If you do not dry your clothes with a clothes dryer, your
clothes
clothes may retain more lint.
Incorrect sorting
•
Separate lint producers from lint collectors.
Washing too long
•
Wash small loads for a shorter time than larger loads.
Detergent not dissolving
•
Add detergent as wash basket fills with water, before you
load clothes.
•
Try a liquid detergent.
•
Use warmer water temperature.
Overloading
•
Load clothes no higher than the top row of holes in the
washer tub.
•
Make sure load size selector matches clothes load size.
Incorrect use of fabric softener
•
Check fabric softener package for instructions and follow
directions for using dispenser.
clothes